What People Say About Us

‘I have worked with HSB in a number of projects over the past few years and always found their overall approach to be of the highest professional standard, their analysis to be insightful and their proposed solutions to be both creative and feasible.’ ‘HSB is very much focused on providing workable solutions.’ 1140 Heat pump with underfloor – Luke Townsend

‘This system is much better than the older heating systems, very economical; it provides very controlled heating.’ ‘I regard it as a good investment and I was very pleased with the service and efficiency of HSB.’ 1240 Combination Heat pump with underfloor - Paudie Sugrue

‘In particular HSB have provided professional advice on all renewable energies available and explained this in lay mans terms.’ – Noel O’Sullivan

Under Floor Heating

For more information see

• Multi-Layer Pipe

  
  Multi-layer pipe for heating system, made from composite material using a technologically advanced processing during which PE-RT (polyethylene of raised temperature resistance) pipe is coupled with a 0.2 mm thick aluminium core, butt welded at the head and externally coated with another layer of PE-RT. Certified to DVGW W 534

• Pipe Decoiler

  
  Completely dismountable, for rolls up to 600 mts long. Size of rolls: minimum Ø 35 cm, maximum Ø 100 cm, maximum h 50 cm.

• Pipe Track

  
  Guide for pipe anchoring Ø 17-25 Size Pcs./Pack 1000 x 40 x 50 mm (LxHxW) 50 1000 x 40 x 50 mm (LxHxW) (*) 50 Modular guide for pipe anchorringØ 17-25. Minimum passage 10 cm. (*) with adhesive base

• Pipe Clips

  
  Pipe-fixing clip for Tacker gun Size Pcs./Pack Ø pipes 16-20 mm 1000 In plastic material, for fixing pipes to the insulation.

• Pipe Staple Gun

  
  It allows fixing of pipes to the Plan Floor panel from upright position without effort.

• Floor Heating Manifold

  
  1" - 1"1/4 pre-assembled distribution manifold nickel-plated, 24x19 takeoffs with lockshields with the flow meters

• Right-angle Ball Valves

  
  Right-angle Progress ball valves with pipe union for thermometers

• Weather compensating Controlbox

  
  Weather compensating Controlbox with servomotor and flow meters for low temperature underfloor heating or cooling

• Floor heating Mixing Set

  
  Floor Mixing Unit - Standard pre-assembled kits with flow meters, supplied with Grundfos pump

• Sealed system kit

  
  Sealed system kit for quick and cost effective solutions to sealed / un-vented heating systems. This pack consists of an expansion vessel, filling loop, safety valve with gauge and a wall bracket for the vessel.

• Electro-thermic head normally closed

  
  The valve opens upon receiving the command from the thermostat or any similar control device.

• Wiring box 8 zone

  
  Wiring box 8 zone

• Basic wiring box 6T

  
  Basic wiring box 6T only suitable for 2 wire electrothermic heads

• Sintesi 4 programmable room thermostat

  
  Sintesi 4 programmable room thermostat

• Control T - Electro-thermic head normally closed

  
  Emmeti have developed a new generation of Electrothermic heads, built around a sensitive wax/copper element, for responsive actuation.

• Manifold cabinet

  
  Manifold cabinet in galvanised steel with enamelled door white colour. For 120 mm brick thickness suitable for 1"1/4 manifolds. For mounting in the wall.

• 27 mm spanner for tightening takeoffs

  
  Up toØ 18 only. This is a dedicated low cost shoulderless spanner for manifolds with 36 mm interaxials.